Covestro and Fraunhofer launch CARBEX project to turn car waste into basic chemicals

By: ICN Bureau

Last updated : November 16, 2026 5:38 pm



CARBEX project develops low-carbon process to produce BTEX aromatics from automotive shredder residue


Covestro, the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT, and Carbon Minds GmbH have launched the CARBEX research project. This joint initiative aims to validate a recycling process that recovers aromatics—specifically benzene, toluene, ethylbenzene, and xylenes (BTEX)—from automotive shredder residue (ASR). Today, ASR remains a car recycling waste stream that is primarily incinerated. Within the partnership, Covestro is leading the industrial activities.

BTEX aromatics serve as essential building blocks for the chemical industry. Covestro relies on benzene as a raw material to manufacture MDI (methylene diphenyl diisocyanate), while using toluene to create TDI (toluene diisocyanate). MDI goes into rigid insulation foams for buildings and refrigerators, as well as structural and sound-dampening parts for vehicles. Meanwhile, TDI is used to make flexible foams found in mattresses, upholstered furniture, and car seats.

At the end of a vehicle’s life, components like these, which contain significant amounts of polyurethane, can end up back in automotive shredder residue. This means CARBEX could help close the loop in automotive recycling.

“With CARBEX, we are tapping into a source of carbon that is currently mostly burned,” says Dr. Stefanie Eiden, Project Manager at Covestro. “If we can recover benzene and toluene from automotive shredder residue at the quality required for our MDI and TDI production processes, we can close a material loop while replacing an emissions-intensive step in the production of basic chemicals.”

Today, aromatics are primarily produced by steam cracking fossil-based naphtha. In Germany alone, this generates roughly 8 million metric tons of direct CO₂e emissions annually, alongside another 11 million metric tons from crude oil extraction and naphtha production.

At the same time, more than 466,000 metric tons of automotive shredder residue (ASR) are generated in Germany each year. Around 210,000 metric tons are used for energy recovery or disposed of. On average, polyurethane accounts for 20% of this waste stream by weight, although the share can vary significantly depending on its source.

Pyrolysis coke becomes a catalyst

CARBEX is based on Fraunhofer UMSICHT’s patented Pyromat technology. It combines pyrolysis with a subsequent autocatalytic reforming process, in which the pyrolysis coke generated during the process itself is used as both a catalyst and an adsorbent.

At around 500°C, coke components—such as calcium carbonate, titanium dioxide, and copper—promote aromatic compound formation while binding halogens like chlorine and bromine to keep them out of the pyrolysis oil. This eliminates the need for costly external catalysts that rapidly deactivate when exposed to real-world waste contaminants.

In preliminary lab tests with automotive shredder residue, Fraunhofer UMSICHT achieved a 62% BTEX content in pyrolysis oil—about 60% higher than conventional methods—while cutting halogens by up to 99%. The institute also estimates that its Pyromat process generates roughly 1.1 metric tons of CO₂e per ton of BTEX, nearly 40% lower than steam cracking (1.6–1.8 tons).

“The Pyromat technology uses pyrolysis coke as both a catalyst and an adsorbent. This makes the process robust and cost-effective, especially when dealing with highly contaminated waste streams,” explains Dr. Thomas Fehn, Project Manager at Fraunhofer UMSICHT’s Sulzbach-Rosenberg branch. “As part of the project, we are taking this approach from the laboratory to continuous pilot-scale operation at a throughput of 10 kilograms per hour.”

According to market studies, widespread industrial adoption of the process could reduce CO₂e in Germany by up to 640,000 metric tons per year. It would also reduce raw material-related emissions by replacing fossil-based naphtha.

From waste to isocyanates

CARBEX covers the entire value chain, from BTEX production to its use in industrial applications. Fraunhofer UMSICHT is adapting its existing pyrolysis plant, converting a fixed-bed reactor into a moving-bed reactor and identifying stable operating conditions. The aim is to produce at least 50 kilograms of BTEX-rich pyrolysis oil with halogen levels below 30 ppm – the threshold for further processing in large-scale industrial plants.

Covestro is developing a model-based separation process to recover the individual aromatics benzene and toluene from the pyrolysis oil through distillation. It will then validate their suitability for use in MDI and TDI production and carry out a techno-economic assessment. As an independent partner, Carbon Minds GmbH is responsible for the ISO-compliant cradle-to-gate life cycle assessment (LCA) of the new value chain.

Closing material loops and meeting recycling targets

The potential is significant. Industry analyses show that more than 2.6 million metric tons of aromatics are produced in Germany every year, with a market value of around €1.95 billion. At the same time, regulatory requirements for recycling are becoming stricter. For example, the EU End-of-Life Vehicles Regulation (ELVR) will introduce mandatory recycled-content targets for plastics used in vehicles from 2032. Part of the recycled material will have to come from end-of-life vehicles. Polyurethane chemically recycled through the CARBEX process could help meet these requirements.

The CARBEX project (September 2026 to August 2029) is funded by the German Federal Ministry of Research, Technology and Space under its “Avoiding Climate-Relevant Process Emissions in Industry” (KlimPro-Industrie II) funding program.

Covestro Fraunhofer CARBEX car waste basic chemicals

First Published : November 16, 2026 12:00 am